intensive pre-cleaning
rust stains cleaner

Product description: Cleaner which easily removes stubborn rust stains, flash rust and soot. Suitable for use with polyester, stone, galvanized surfaces, stainless steel, rubber and glass.

Directions for use: Shake well before use. Apply the cleaner directly to the surface to be treated. Leave the product to do its work for a minimum period of 15 minutes. Remove the deposit by circular rubbing with a wet scrub pad or cotton cloth. Finally rinse the surface using copious amounts of water. Prevent premature drying. If necessary, repeat the treatment or continue the treatment with STeP 1 – IMPRESSED^® GLAsS cleaner.

Usage: ca. 10-15 ml per m²

Packaging: 500 ml

STeP 1 – cleaning
glass cleaner

Product description: Cleans and polishes glass surfaces. Removes dirt, stains, bird droppings, flash rust, lime scale, salt deposits and other deposits caused by adverse atmospheric and weather damage. Does not affect the glass.

Directions for use: Shake well before use. Apply the cleaner directly to the surface to be treated. Remove the contamination by circular rubbing using a wet cotton cloth. Finally, rinse the surface using copious amounts of water. Rub dry with a leather or towel. For long-term result use STeP 2 – IMPRESSED^® NANO GLAsS protector.

Usage: ca. 10-15 ml per m²

Packaging: 500 ml

STeP 2 – protecting
nano glass protector

Product description: Protector based on Nanotechnology. The ultimate and longest-lasting protection against all types of dirt and stains, including tree resin, bird droppings, lime scale, salt deposits, acid rain, atmospheric and weather damage, soot and metal particles. The protective coating does not affect the glass.

Directions for use: Shake well before use. Ensure the surface to be treated is clean and dry. If necessary, use IMPRESSED® Glass Cleaner for this purpose. Spray the product onto the surface and rub in, using a micro fibre sponge or wash mitt and circular movements, so that the protector is absorbed deeply into the pores of the material. For best results leave to dry for at least 60 seconds. Finally, polish the treated surface using the micro fibre sponge or wash mitt.

Usage: ca. 10-15 ml per m²

Packaging: 200 ml